Multi Frequency Light Sensing Smart Alarm White Noise Sound Car Backup Alarm

Product Description

 

Product Parameters

 

Model	Voltage (VDC)	Output level(±4dBA @4FT)	Remarks
YS-B21	12~48	97	white noise optional
YS-B22	12~48	102	white noise (12~24V)available
YS-B23	12~48	bespoke message
YS-B24	12~48	107
YS-B26	12~48	87	white noise available

Suitable for: trucks

Product Description

multi frequency light sensing smart alarm white noise sound nylon housing car back up alarm

General specifications:

 

Output level	102dB ± 4dB at 1.2M
Voltage	12-48 VDC
Current drain	less than 0.6A
temperature range	-40 to 85 degree C
Frequency	dual or multi
Duty cycle	0.85 pulse per second 50% ON 50% OFF
weight	320g ± 10%
Dimensions	103.5*40.5*71mm

How to Add a Backup Alarm
Beep, beep, beep. You've heard the sound as you approached a work site. The heavy equipment and big trucks sound an audible alarm each time they are driven in reverse gear. It makes sense to warn other workers, since the operator of the equipment doesn't have the same field of view as he would moving forward. If you have equipment that is required to have a back-up alarm or think it would be a good idea to equip your truck with one, even though not legally mandated, adding a reverse-gear alarm is a job you probably can handle yourself.
Step 1
Set the emergency brake on your vehicle.

Step 2
Turn the ignition key on your vehicle to run, but do not start the vehicle's engine.

Step 3
Move the shift lever to reverse to turn-on your vehicle's back-up lights.

Step 4
Connect the ground wire of the 12-volt test light to a bare metal part of the vehicle's frame, bumper or sheet metal.

Step 5
Penetrate the insulation of the wires leading to the vehicle's rear tail light assembly, one at a time, until you locate the one that turns on the test light. This is the wire that feeds the back-up light.

Step 6
Locate a position on the chassis of your vehicle to mount the back-up alarm. The exact location will depend on the model and size of the back-up alarm you choose and the model of your vehicle. The location should be toward the rear of the vehicle, shielded as much as possible from road hazards and in a spot you can access with the tools needed to attach the alarm to the chassis. Mount the alarm to your vehicle.

Step 7
Connect the negative or ground wire of the alarm securely to one of the studs bolting the alarm to your vehicle.

Step 8
Connect the positive wire of the alarm to the wire you identified as the back-up light feed using a Scotch-Lock solderless connector. If the positive wire of the alarm is too short to reach the back-up light wire, lengthen the positive wire with a length of 16-gauge, copper automotive wire, connected with a solderless butt connector.

Support the wires firmly against the frame or chassis of the vehicle with nylon wire tie

Alarms of different housings

wire connection version ot studs version available for some housings

Connctors optional for wire connection versions

beep sound, white noise sound, vocal messages available for some models

Intelligent alarms with beep sound, white noise sound available.

Intelligent alarms with night mode, silent mode avaible.

Quick details for all series alarms

Series	Size	Sound	Remark
B00	127*70*73.5mm	beep sound	intelligent models available
B10	dia 60*46.3mm	beep sound
B20	103.5*40.5*71mm	beep, white noise, bespoken message	intelligent models available
B30	103*44.5*68mm	beep, white noise, bespoken message	intelligent models available
B40	129*69*74mm	beep sound, bespoken message	manual adjustable available
B50	102*44.5*69.5mm	beep, white noise, bespoken message	intelligent models available
B60	127*95*77mm	beep, white noise, bespoken message	intelligent models available
B70	127.5*79*82mm	beep, white noise, bespoken message	models with night mode available
B80 S	105*71.8*70mm	beep, white noise, bespoken message	models with night mode available
B80 L	130*76*88mm	beep, white noise, bespoken message	models with night mode available
BJ	58*30*59.5mm	beep, white noise, bespoken message
B90		beep, white noise, bespoken message	models with night mode available

More information about the alarm:

Alarm drawing, sizes in mm

FAQ

Q1: what is the MOQ?

YUEDA: No MOQ required.

Q2: what it the lead time?

YUEDA: 2-4 weeks, for regular models, we usually prepare some in stock, so shipment could be made very soon.

Q3: Can I have some free samples for evaluation first?

YUEDA: Sure. We could offer some free samples.

Q4: What payment methods do you accept?

YUEDA: T/T, PayPal, western Union, Money gram.

Q5: What payment terms do you accept?

YUEDA: Generally, payment before shipment at the beginning.

Q6: Can you make some revisions to it?

YUEDA: Sure, we will, just let us know.

Q7: Is it RoHS/REACH compliant?

YUEDA: Yes, all our products are RoHS and REACH compliant.